14.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/ FRONT SHOCK ABSORBER/STEERING STEM Downtown 300i ABS Install new pads so that their ends rest on the pad retainer on the brake properly. Install the pad pin by pushing the pads against the pad spring to align the pad pin holes in the pads and caliper. Install the front caliper onto the fork leg and then install and tighten the new two caliper mounting bolts to the specified torque. Torque: 35 N-m (3.5 kgf-m) Tighten the pad pins to the specified torque. Torque: 18 N-m (1.8 kgf-m, 13 lbf-ft) BRAKE DISC INSPECTION Visually inspect the brake disc for damage or cracks. Measure the brake disc thickness. Service limits: 3 mm (0.12 in) Replace the brake disc if the smallest measurement is less than the service limit. Measure the brake disc warpage. Service limits: 0.3 mm (0.012 in) 14-13