4. LUBRICATION SYSTEM Downtown 300i ABS Remove two oil pump mounting bolts and the oil pump. Arrow Mark OIL PUMP INSTALLATION Install the oil pump into the crankcase. Install the oil pump with the arrow on the pump body facing up and fill the oil pump with engine oil before installation. Pump Shaft After the oil pump is installed, tighten the two mounting bolts. Install the pump driven gear and drive chain by aligning the pump driven gear with the cutout in the pump shaft. Install and tighten the pump driven gear bolts. Install the oil separator cover and tighten the bolts. Oil Separator Cover Install the starter idle gear and starter clutch. Starter Idle Gear Install the gasket and dowel pins. Install the right crankcase cover and tighten the twelve bolts. Torque: 1.2 kg-m Diagonally tighten the bolts in 2 3 times. Dowel Pin 4-6