15. REAR WHEEL/AXLE/SHOCK ABSORBER/SWING ARM MXU 500 IRS INSTALLATION Install the tie-rod onto the steering knuckle and tighten the nut to the specified torque. Torque: 4.8 kgf-m (48 N-m, 34 lbf-ft) Install the luck 2 bolts Do not apply oil to the seat of the nuts. Do not loosen the nuts after torque tightening. If the nuts groove is not aligned with the cotter pins hole, align Apply grease groove with the hole by tightening up on the nuts. Apply grease 15-9