1. Kymco
  2. Manuale-dofficina
  3. mxu 500 irs efi Manuale-dofficina
  4. Pagina 332

mxu 500 irs efi Manuale-dofficina : Pagina 332

Microfiches
Image preview

Pagina 330

Image preview

Pagina 331

Image preview
Image preview

Pagina 333

Image preview

Pagina 334

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315 320 325 330 335 340 345 350 355 360 365 370 375 380 385 390 395 400 405 410 415 420 425 430 435 440 445 448 
          16. BRAKE SYSTEM                                                          MXU 500IRS

:
    Refer to the "REAR PARKING
    SYSTEM" section in this chapter to
    install the left master cylinder holder.




 Install the brake fluid hose with the
 attaching bolt and two new sealing washers,
 then tighten the bolt to the specified torque.

 Torque: 3.5 kgf-m (35 Nm, 25 lbf-ft)




 Apply lightweight lithium-soap base grease
 to the dust boot in the master cylinder, then
 install the brake lever.
 Apply lightweight lithium-soap base grease
 to the bolt, then install and tighten the bolt
 and nut securely.

 Fill the brake reservoir with the specified
 brake fluid and bleed air from the brake
 system (refer to the "FRONT BRAKE
 FLUID CHANGE/AIR BLEED" section
 or "REAR BRAKE FLUID
 CHANGE/AIR BLEED" section or
 "COMBINATION BRAKE FLUID
 CHANGE/AIR BLEED " section in this
 chapter).
                                                  Apply grease to the dust boot

 Install the brake reservoir cap.



                                                                              16-26
 Microfiches.net - Cataloghi ricambi di altre marche